VX1743
16 Channel 12bit 3.2 GS/s Switched Capacitor Digitizer
Features
- 12-bit @ 3.2 GS/s, 1024 samples per event
- Developed in collaboration with CEA/IRFU & CNRS/IN2P3/LAL and based on the SAMLONG chip
- 3.2, 1.6, 0.8, 0.4 GS/s software selectable sampling frequencies
- Analog inputs on MCX coax. connectors
- 16 channels in 1-unit VME64X 6U form factor
- 2.5 Vpp input dynamic range with programmable individual DC offset adj.
- One discriminator per channel with programmable threshold
- Adjustable post-trigger delay (up to 1.25 µs @ 3.2 GS/s)
- Digital Memory buffer: 7 events/ch
- 1024 samples per channel (320 ns recorded time per event @ 3.2 GS/s)
- Dead time due to event conversion: 125 µs (max. @ 1024 samples)
- Real time hit counting independent of acquisition rate on each channel
- On-board charge calculation for fast histogramming (user-defined integration window)
- One embedded pulser per channel for test and reflectometry applications
- Optical Link interface (CAEN proprietary protocol)
- VME64X-compliant interface
- A2818 (PCI) / A3818 (PCIe) Controller available for handling up to 8/32 modules Daisy chained via Optical Link
- Firmware upgradeable via VMEbus/Optical Link
- Multi-board synchronization features
- 16 programmable LVDS I/Os
- Fully controlled by the WaveCatcher readout software
- Drivers and libraries for Windows and Linux 32/64-bit
Overview
The Mod. VX1743 is a VME64X 6U module housing 16 Channel 12 bit 3.2 GS/s Switched Capacitor Digitizer, with 2.5 Vpp single-ended input dynamics, issued from the collaboration with CEA/IRFU & CNRS/IN2P3/LAL and based on SAMLONG chip. A programmable DAC on each channel allows for DC Offset adjustment in the ±1.25 V range.
The analog input signals are continuously sampled into the SAMLONGs (sampling intervals down to 312.5 ps) in a circular analog memory buffer (1024 cells). As a trigger signal arrives, all analog memory buffers are frozen and subsequently digitized with a resolution of 12 bits into a digital memory buffer. During analog to digital conversion process, the VX1743 cannot handle other triggers (Dead Time: 115 us).
The memory buffer allows to store up to 7 full events for each cannel (1 event = 1024x12bit). The buffer can be read by VME bus or Optical Link simultaneously with write operation of successive events.
The module features front panel Clock Input and Output, as well as a PLL for clock synthesis from internal/external references. VX1743 supports multi-board synchronization allowing all switched capacitor memories to be synchronized to a common clock source and ensuring Trigger time stamps alignment. Once synchronized, all data will be aligned and coherent across multiple VX1743 boards.
Each channel is equipped with an individual discriminator, with programmable threshold, which generates a trigger request when the input signal goes over threshold. The trigger requests from the channels are processed by the board to generate a common trigger causing all the channels to acquire an event simultaneously. The common trigger can also be provided externally via the front panel Trigger Input or via the software, for debug purposes, through VMEbus/Optical Link.
VX1743 houses VME (VME64X compliant) and Optical Link interfaces. The VME interface allows data transfers of 60 MB/s (MBLT64), 100 MB/s (2eVME), 160 MB/s (2eSST). The Optical Link supports transfer rate of 80 MB/s and offers Daisy chain capability. Therefore, it is possible to connect up to 8/32 ADC modules to a single Optical Link controller (Mod. A5818).
Mod. VX1743 features an embedded Charge Mode, where the pulse integration window is defined by the user (high rates ~3.5 KEvents/s). This feature allows to perform on-line processing on detector signal directly digitized.
Some typical applications:
- Precise characterization of high speed detectors (PMTs, SiPMs, APDs,…)
- High Resolution Photon timing with MCP-PMTs
Software available (Windows and Linux):
CAEN provides drivers for all the different types of physical communication channels, a set of C libraries (CAENComm and CAENDigitizer) for Windows and Linux OS, as well as a control software tool for Windows:
- CAENUpgrader: tool that allows the user to update the firmware of the digitizers, change the PLL settings, load, when requested, the license for the pay firmware and other utilities.
- WaveCatcher: fully graphical program that implements an oscilloscope.
Never use this digitizer with crates VME8001, VME8002, VME8004 and VME8004A. Overheat may damage the module.
The VX1743 fits in the single-slot CAEN VME64X u-crate, which allows you to convert the VME digitizer into a desktop board for lab tests.
Technical Specifications
- GENERAL
Form Factor: 1-unit wide VME 6U module
Weight: 535 g
- ANALOG INPUT
Channels: 16 channels single ended
Bandwidth: 500 MHz Offset Programmable 16-bit DAC for DC offset adjustment on each channel.
+Range: ± 1.25 V
Impedance: 50 Ω
Connector: MCX
Full Scale Range: 2.5 Vpp DC coupled
- TEST FUNCTION
One pulser per channel with programmable 16-bit pattern (fixed amplitude)
- DIGITAL CONVERSION
Analog Memory (Switched Capacitor Array) SAMLONG Fast Analog Memory chip 2 channels, 1024 storage cells/ch 320 ns minimum recorded time/event
Resolution
12 bitsSampling Rate 3.2/1.6 /0.8/0.4 GS/s SW selectable
Dead Time (Event A/D Conversion)
125 µs (max. @ 1024 samples)
Note: value decreasing proportionally with the recording depth (configurable record length)
- NOISE LEVEL
0.75 mV RMS
- TIMING RESOLUTION
< 8 ps RMS (5 ps RMS typical) @ 3.2GS/s
Obtained at thermal regime, after INL time calibration and with dual-pulse timing measurement by pulse generator
Test conditions: periodic input pulses with 1V Amplitude, 1kHz Frequency, rise time of 0.8/1.6/2.5 ns; the resolution does not change significantly when varying the delay Δt between the two pulses.
Note: it is recommended to provide proper cooling to improve the resolution performances
- SYSTEM PERFORMANCES
Sampling Time Precision - < 20 ps @ 3.2 GS/s (before calibration)
- < 5 ps @ 3.2 GS/s (after calibration)
Note: obtained with factory calibration and dual-pulse timing measurement with pulse generator.
Test conditions:
- Periodic input pulses with 1-V Amplitude
- 1-kHz Frequency Rise time of 0.8 / 1.6 / 2.5 ns.
The resolution does not change significantly when varying the delay Δt between the two pulses.
Noise Level 0.75 mV RMS
- CLOCK GENERATION
- Synchronization clock source: internal/external
- On-board PLL provides generation of the main board clocks from an internal (50 MHz loc. oscillator) or external (front panel CLK-IN connector) reference
- ACQUISITION MEMORY
- 7 full event/ch Multi‐event buffer (1024 S/event, that is 320 ns/event @ 3.2 GS/s)
- Independent read and write access
- Programmable event size and pre/post‐trigger
- TRIGGER
Trigger Source:
- Self-trigger: channel over/under threshold (based on analog discriminator on each channel with DAC adjusted threshold) for Common trigger generation
- External-trigger: common trigger by TRG-IN connector
- Software-trigger: common trigger by software command
Trigger Propagation: TRG-OUT programmable digital output
Trigger Time Stamp: 40-bit counter, 5-ns resolution, 83-min range Timer reset by S-IN input connector
Trigger Threshold: Programmable through a 16-bit DAC in the range of ±1.25 V on each channel
- SYNCHRONIZATION
Clock Propagation Daisy chain through CLK-IN/CLK-OUT (AC coupled differential LVDS, ECL, PECL, LVPECL, CML on AMP MODU II connectors)
One-to-many clock distribution from an external clock source on CLK-IN connector
Acquisition Synchronization Sync Start/Stop through digital I/O (S-IN or TRG-IN input, TRG-OUT output)
External Trigger time Stamp reset
Trigger Time Stamps Alignment By S-IN input connector
- ADC & MEMORY CONTROLLER
Altera Cyclone EP3C16 (1 FPGA serves 4 channels)
- COMMUNICATION INTERFACE
Optical Link CAEN CONET proprietary protocol, up to 80 MB/s transfer rate Daisy chainable: it is possible to connect up to 8/32 ADC modules to a single Optical Link Controller (Mod.A2818/A3818)
VME VME 64X compliant Data transfer mode: BLT32, MBLT64 (70 MB/s using CAEN Bridge), CBLT32/64, 2eVME, 2eSST (up to 200 MB/s)
- ANALOG MONITOR
12-bit / 125MHz DAC, FPGA-controlled, provides a Trigger Majority signal on the MON/Σ front panel connector, proportional to the number of the over-threshold channels (in steps of 125 mV)
- LVDS I/O
- 16 general purpose LVDS I/O controlled by the FPGA: Data Ready, Memory full, Memory Clear, TTT reset and other functions available.
- An Input Pattern from the LVDS I/O can be associated to each trigger as an event marker
- DIGITAL PULSE PROCESSING
Software selectable embedded Charge Mode for input pulse high rate charge integration and fast histogramming
- FIRMWARE UPGRADE
Firmware upgreadable via VMEbus/Optical Link
- SOFTWARE
General purpose C libraries and configuration tools (Windows® and Linux® support); WaveCatcher readout software (Windows® only)
- POWER CONSUMPTIONS
4 A @ +5 V
625 mA @ +12 V
-12 V not used
- Documentation
- Software
- Firmware
Waveform Recording
Name | File extension | File size | Revision | Date |
---|---|---|---|---|
x743 Waveform Recording Firmware | CFA | 1.80 MB | 4.25_2.24 | December 14th, 2022 |
Download
Free Release Notes: Release_Notes.txt Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software and Firmware License – Free VersionEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a free of charge, personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use of the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use of the CAEN Software that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation to all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in para. no. 6, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledge that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software.
The End User is solely responsible for compliance with agreements it has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
The End User acknowledges that, under this EULA, CAEN is not obliged to provide the End User with:
If the End User would need any of such activities, It shall enter into a specific and separate agreement with CAEN having as object the required activities.
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non-compliance, as liquidated by the competent court of law.
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. |
Manuals
Name | File extension | File size | Revision | Last update |
---|---|---|---|---|
V1743 & VX1743 16 Channel 12bit 3.2 GS/s Switched Capacitor Digitizer | 3.37 MB | 4 | March 31st, 2022 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. | ||||
Safety Information and Product Support Service (ENG/ITA) | 1.85 MB | - | March 13th, 2024 | |
Changelog: Note: |
Brochures, Flyers
Name | File extension | File size | Revision | Last update |
---|---|---|---|---|
Digitizer & DPP Family Flyer | 1.54 MB | 11 | November 20th, 2019 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. | ||||
743 - Digitizer Family (JAN 2018) | 1.22 MB | 5 | January 30th, 2018 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. |
White Papers
Name | File extension | File size | Revision | Last update |
---|---|---|---|---|
WP2081 Digital Pulse Processing in Nuclear Physics | 6.16 MB | 4 | June 13th, 2017 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. |
Related Software Products
Name | Description |
---|---|
WaveCatcher | Oscilloscope Tool for 743 digitizer family |
WaveDemo x743 | CAEN x743 Digitizer Readout Application |
CAENComm Library | Interface library for CAEN Data Acquistion Modules |
CAENDigitizer Library | Library of functions for CAEN Digitizers high level management |
CAEN Toolbox | Multi-Functional Software Suite for the Upgrade of Front-end Boards, Bridges and Power Supplies |
Related Firmware Products
Name | Description |
---|---|
D-WAVE | Digitizer Waveform Recording Firmware |
Compare
Compare with Digitizers.
Loading...
Accessories
- AI2700
- Optical Fiber Series
- A654
- Cable assembly LEMO 00 male to MCX male – 1 m
- A659
- Cable assembly BNC male to MCX male – 1 m
- A317
- Cable assembly for Clock distribution 3-pin AMPMODU IV female terminations – 18 cm / 25cm
- A318
- Adapter for Clock signal FISCHER S101A004 male to 3-pin AMPMODU IV female – 10 cm
- A316
- Cable assembly 2.54mm 2-pin header female - 5 cm
- A952
- Cable assembly 2.54mm 34 pin female to 2.54mm 34 pin female - 50 cm
- A953
- Cable assembly 2.54mm 34 pin female to two 2.54mm 34 pin female – 50 cm
- A954
- Cable assembly 2.54mm 34 pin female to two 2.54mm 16 pin female - 50 cm
Ordering Options
Code | Description | |||
---|---|---|---|---|
WVX1743XAAAA | VX1743 - 16 Ch. 12 bit 3.2GS/s Switched-Capacitor Digitizer: 7 events/ch (1kS/event), EP3C16, SE RoHS |
Related Products
μ-crate
Desktop single-slot VME64X Crate
VX4718
VME to USB 3.0/Ethernet/Optical Link Bridge
VX3718
VME64 to USB 2.0/Optical Link Bridge
VME8200
9U 21Slot VME64X Enhanced Crate series
VME8100
8U 21 Slot VME64/64X Enhanced Crate Series
VME8011
7U 21 Slot VME64 Low Cost Crate
VME8010
7U 21 Slot VME64 Low Cost Crate
VME8004B
2U 4 Slot VME64 Mini Crate
VME8001
1U 2 Slot VME64 Mini Crate
NV8020A
7U CRATE VME/NIM 8 slot VME64 365W, 5 slot NIM 150W
A5818
PCI Express Gen 3 CONET2 Controller
A4818
USB 3.0 to CONET2 Adapter
Related Software
WaveDemo x743
CAEN x743 Digitizer Readout Application
WaveCatcher
Oscilloscope Tool for 743 digitizer family
CAENDigitizer Library
Library of functions for CAEN Digitizers high level management
CAENComm Library
Interface library for CAEN Data Acquistion Modules
CAEN Toolbox
Multi-Functional Software Suite for the Upgrade of Front-end Boards, Bridges and Power Supplies
Related Firmware
D-WAVE
Digitizer Waveform Recording Firmware