A319B
Clock cable assembly from Digitizer Series 1.0 to Digitizer Series 2.0 - 20cm
Overview
The A319B is a cable assembly for the Clock signal distribution between non homogenous digitizer series, matching the 3-contact connector on the Digitizer Series 1.0 to the 4-pin connector on the Digitizer Series 2.0. Through the front panel CLK-OUT / CLK-IN daisy chain, this cable carries the differential clock signal from one digitizer to another to synhcronize multiple boards.
Compare
Compare with General Adapters.
Loading...
Ordering Options
| Code | Description |
|---|---|
| WA319BXAAAAA | A319B - Clock Cable for Digitizer Series 1.0 to 2.0 interconnection (L=20cm) RoHS |
Related Products
VX1761
2 Channel 10 bit 4GS/s Digitizer
VX1751
4/8 Channel 10 bit 2/1 GS/s Digitizer
VX1743
16 Channel 12bit 3.2 GS/s Switched Capacitor Digitizer
VX1742
32+2 Channel 12bit 5 GS/s Digitizer
VX1740
64 Channel 12bit 62.5 MS/s Digitizer
VX1730 / VX1730S
16/8 Channel 14 bit 500 MS/s Digitizer
VX1725 / VX1725S
16/8 Channel 14-bit 250 MS/s Digitizer
VX1720
8 Channel 12bit 250 MS/s Digitizer
V1761
2 Channel 10 bit 4GS/s Digitizer
V1751
4/8 Channel 10 bit 2/1 GS/s Digitizer
V1743
16 Channel 12bit 3.2 GS/s Switched Capacitor Digitizer
V1742
32+2 Channel 12bit 5 GS/s Switched Capacitor Digitizer
V1730 / V1730S
16/8 Channel 14 bit 500 MS/s Digitizer
V1725 / V1725S
16/8 Channel 14-bit 250 MS/s Digitizer
V1724
8 Channel 14 bit 100 MS/s Digitizer
V1720
8 Channel 12bit 250 MS/s Digitizer
DT2730
32 Channel 14 bit 500 MS/s Digitizer