VX2730
32 Channel 14 bit 500 MS/s Digitizer with programmable Input Gain
Features
- 14 bit @ 500 MS/s ADC
- 32 single-ended analog inputs on MCX connectors
- 4Vpp input range with software selectable analog gain
- DT2730 desktop form factor also available
- Open FPGA programming through the graphical tool SCI-Compiler
- Wide range of applications (from Nuclear and Particle Physics to High Timing Resolution, Fast Neutron Spectroscopy, and Homeland Security)
- Suited for signals from liquid or inorganic scintillators coupled to PMTs or SiPMs.
- On-board live selection between scope mode (common trigger) and DPP mode (independent channel self-trigger)
- Wide selection of DPP algorithms (e.g. PHA on request, PSD, ZLE on request, DAW on request)
- Multiboard Synchronization and system-building capabilities
- Front panel fully programmable I/Os (4 LEMO TTL/NIM and 16 LVDS)
- Special 125MS/s 14-bit DAC output (LEMO) for signal inspection or trigger sum
- On-board Zynq® UltraScale+™ FPGA with embedded Linux-based ARM® processor
- 5GB of total acquisition memory (DDR4)
- USB-3.0 type-C and 1/10 Gigabit Ethernet or optional CONET Coming Soon (CAEN daisy chainable Optical Link protocol) interfaces
- Fully supported by CoMPASS and WaveDump2 readout software
- SDK for embedded Linux processor and host PC
Overview
The VX2730 Digitizer is a 32-channel digital signal processor for radiation detectors in the VME64X form factor. It offers not only waveform digitization and recording but also Multi-Channel Analysis for a complete range of applications like nuclear and particle physics, high-timing resolution, Fast Neutron Spectroscopy, and Homeland Security.
It is compliant with mid-fast signals typically coming from liquid or inorganic scintillators coupled to PMTs or SiPMs.
The VX2730 can perform pulse height measurements (PHA on request), and other algorithms that will be gradually developed, such as constant fraction timing (CFD), charge integration (QDC) and pulse shape discrimination (PSD). Algorithm settings can be set independently channel by channel.
Each channel of the module digitizes the analog input, which can be the signal coming from a physics detector, with a 14-bit, 500MS/s ADC. The sampled data are used to initiate the digital pulse processing sequence, managed in the FPGA at the firmware level. Different firmware types can be stored at once on-board and then selected via software, according to the specific setup and acquisition mode.
- Common trigger: All channels acquire simultaneously with a common trigger. The trigger can be fed externally or generated by a combination of individual channel discriminators. This mode is mainly intended for the acquisition of waveforms, like a digital oscilloscope. Options for zero suppression are available to remove not significant data.
- Independent trigger: Suited mode for trigger-less applications, where no global trigger is needed but each channel acquires waveforms upon its self-trigger which fires through a digital discriminator, independently of the others.
- DPP: Real-time processing in the FPGA allows for the extraction of physical parameters from the waveform (e.g. pulse height, charge, timestamp, PSD), well suited for high counting rate applications. It is yet possible to save both raw waves and parameters.
CAEN provides closed firmware solutions for scope (waveforms) and DPP modes, as well as a firmware generation and compiling tool for customers who want to personalize the acquisition to implement custom algorithms for pulse processing in the open FPGA. The user can have control of the data output information and customize the trigger logic to get several combinations of self-triggers and I/O signals to validate or discard the events. The Linux-based Arm processor embedded in the onboard CPU makes it possible to run automated user routines. Multi-board synchronization can be implemented via backplane or front panel easy-cabling options. Multiple communication interfaces offer flexible readout options: USB 3.0 type-C and 1/10 Gigabit Ethernet or optional Optical (CONET – CAEN Daisy Chainable Optical Link Protocol Coming Soon) Links.
The VX2730 fits in the single-slot CAEN VME64X u-crate, which allows you to convert the VME digitizer into a desktop board for lab tests.
Supported third-party software:
Moreover, you can check this FAQ to see which CAEN VME crates are suitable for this product.
Technical Specifications
- GENERAL
Weight: 700 g
Form Factor: 1-unit wide, 6U VMEX64
Dimension: 6U x 160 mm
- ANALOG INPUT
Channels: 32 channels, single-ended
Bandwidth (-3dB): 250 MHz guaranteed for Gain ≥ 2
Impedance: 50 Ω
Gain: x1 ÷ x20, software programmable in steps of 1dB independently on each channel
Connector Type: MCX
Full Scale Range: 4 Vpp ÷ 0.2 Vpp
DC Offset: Adjustable in the ± 2.5V range independently on each channel
- DIGITAL CONVERSION
Resolution: 14 bits
Sampling Rate: 500 MS/s (simultaneously on each channel)
- SYSTEM PERFORMANCE
ENOB (Typ.): 10.5 (@50MHz, -3dB, Gain x2)
RMS (Typ.): 2.4 LSB RMS (@Gain x2)
- DIGITAL I/O
CLK-IN (CLK-OUT) - Two differential pairs:
- CLK, reference clock signal
- SYNC, synchronization signal (start/stop, T0, etc.)
- Daisy chainable in multi-board synchronization
- 2.54mm 4-pin AMPMODU Mod II male connector
- CLK-IN: AC-coupled LVDS, ECL, PECL, LVPECL, CML (Zdiff = 100 Ω)
- CLK-OUT: LVDS
- Daisy chainable for multiboard synchronization with sw programmable CLK-OUT delay shift
LVDS I/O - 16 differential pairs
- Sw programmable I/O function (individual self-trigger outputs, trigger validations, Veto, Busy, Start, Stop, Pattern Input, etc.)
- LVDS
- Zdiff = 100 Ω (when set as inputs)
- 2.54mm 34-pin AMPMODU Mod II male connector
TRG-IN/TRG-OUT/GPIO/S-IN - General-purpose digital I/Os
- Sigle-ended TTL/NIM
- LEMO 00 male connector
- Sw programmable function (trigger, veto, busy, etc.)
- TRG-IN/S-IN: internally terminated with 50 Ω (Zin = 50 Ω)
- TRG-OUT requires Rt = 50 Ω
- GPIO as Input must be terminated with 50 Ω
- GPIO as TTL Output requires Rt = 50 Ω
- GPIO as NIM Output requires Rt = 50 Ω or 25 Ω
- Two differential pairs:
- ANALOG OUTPUT
- Sw programmable DAC output for signal inspection, pulse generation, majority level
- 14-bit Digital-to-Analog Converter (DAC)
- 125 MS/s Update Rate
- LEMO 00 connector
- ±1 V @ 50Ω load
- ±2 V @ hi-Z load Output Range
- ACQUISITION MEMORY
- 5 GB total DDR4 memory size (83.886 MS/ch) divisible in multiple buffers
- Maximum record length: 84 ms @ 500 MS/s (total memory size divided by 2)1
(1) Value referred to the Scope firmware (minimum of two buffers admitted)
- COMMUNICATION INTERFACES
1 GbE - Copper RJ45 or optical LC connector on SFP+ transceiver
- Protocol: TCP
- Transfer rate: 110 MB/s
10 GbE (Available on Request)
- Copper RJ45 or LC optical connector on SFP+ transceiver
- Protocol: TCP/IP, UDP
- Transfer rate: 280 MB/s (TCP/IP), t. b. d. (UDP)
CONET (Available on Request) - Optical LC connector on SFP+ transceiver
- CONET2 protocol (CAEN proprietary)
- Transfer rate: 80 MB/s
USB 3.0
- USB-C type connector
- Protocol: USB 3.1 GEN1
- Transfer rate: 280 MB/s
- TRIGGER
Trigger Modes - Common: all channels acquire simultaneously with the trigger (software, external or logic combination of self-triggers)
- Individual: each channel acquires independently with its self-trigger
- Correlated: the individual self-trigger of each channel is validated by the coincidence/anticoincidence logic between other self-triggers and/or external I/Os
Trigger Timestamp – Scope firmware - Resolution: 8 ns coarse timestamp
- Counter range: 48 bits
- Full-scale range: ~625 h
Trigger Timestamp – DPP firmware - Resolution: 2 ns coarse timestamp, 2 ps fine timestamp
- Counter range: 48 bits
- Full-scale range: ~156 h
- SYNCHRONIZATION
Clock Propagation Typical 62.5MHz frequency optionally distributed:
• By fan-out to CLK-IN
• By CLK-IN/CLK-OUT daisy chain with sw programmable CLK-OUT delay shift
Custom frequencies can be supported on requestAcquisition Start/Stop
Daisy chain or fan-out propagation through CLK-IN/CLK-OUT or NIM/TTL, LVDS I/Os
Data Sync Busy/Veto logic on LVDS I/Os or NIM/TTL I/Os for event building synchronization
Trigger Distribution
TRG-IN/TRG-OUT NIM/TTL LEMO I/Os (common trigger) or LVDS I/Os (common or individual trigger)
Trigger Time Stamp Reset Software from START run command or Hardware from S-IN/GPIO input (Scope Firmware only)
- FPGA
- Xilinx Zynq UltraScale+ Multiprocessor System-on-Chip mod. XCZU19EG
- Processing System based on Quad-core Arm with 2GB DDR4 memory @2400 MT/s (Linux OS onboard)
- Programmable logic with more than 1100K system logic cells and 80 Mbit memory
- CAEN FIRMWARE
The firmware is stored in the onboard Flash Memory and live rebootable by Web Interface
DDP Firmware Firmware implementing a digital processing algorithm (e.g PHA, PSD)
Scope Firmware Firmware developed for waveform recording
Upgrades Firmware files and updates can be uploaded via Web Interface
- USER FIRMWARE (OPEN FPGA)
Sci-Compiler
User Firmware Generator and Compiler Graphical Tool for CAEN Programmable Boards.Scope Personalization Customizable features of the Scope firmware:
- Common trigger
- Simultaneous waveform recording on 32 channels management
- Trigger logic
- Wave processing
DPP Personalization Customizable features of the DPP firmware:
- Individual trigger and channel acquisition management
- DPP algorithm
- Trigger logic
- Event data information
- SOFTWARE
Readout SW: CoMPASS spectroscopy software (for DPP firmware only), WaveDump2 (for Scope firmware only)
SDK and Tools: General purpose C libraries with demo samples for host Windows® and Linux® PC, and embedded Arm processor
SCI-Compiler (Open FPGA): Automatic generation of drivers (USB, ethernet), libraries, and demo software for Windows®, Linux®
Web Interface: Firmware management (e,g. upgrades and on-the-fly selection of the firmware to run), board information, PLL and Ethernet configuration, board status monitoring
- ENVIRONMENTAL
Environment: Indoor use
Operating Temperature: 0°C to +40°C
Storage Temperature: -10°C to +60 °C
Operating Humidity: 10% to 90% RH non condensing
Storage Humidity 5% to 90% RH non condensing
Altitude: <2000m
Pollution Degree: 2
Overvoltage Category: II
EMC Environment: Commercial and light industrial
IP Degree: Enclosure (desktop models), not for wet location
- REGULATORY COMPLIANCE
EMC: CE 2014/30/EU Electromagnetic Compatibility
Directive Safety: CE 2014/35/EU Low Voltage Directive
- POWER REQUIREMENTS
+12V: 0.5 A (Typ.)
+5V: 4.8 A (Typ.)
+3.3V: 8.9 A (Typ.)These are preliminary values, refered to a 1-GbE Scope firmware, that could vary depending on the firmware type.
- Documentation
- Software
- Firmware
Waveform Recording
Name | File extension | File size | Revision | Date |
---|---|---|---|---|
2730 Scope Firmware - 1G | CUP | 7.99 MB | 2024100300 | October 22nd, 2024 |
Changelog: [View] - Update FPGA firmware with new regulator settings Readme:
Download
Free Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software and Firmware License – Free VersionEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a free of charge, personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use of the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use of the CAEN Software that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation to all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in para. no. 6, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledge that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software.
The End User is solely responsible for compliance with agreements it has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
The End User acknowledges that, under this EULA, CAEN is not obliged to provide the End User with:
If the End User would need any of such activities, It shall enter into a specific and separate agreement with CAEN having as object the required activities.
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non-compliance, as liquidated by the competent court of law.
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. |
DPP
Name | File extension | File size | Revision | Date |
---|---|---|---|---|
2730 DPP-PSD Firmware - 1G | CUP | 13.98 MB | 2024092000 | September 23rd, 2024 |
Changelog: [View] 2024092000 Readme:
Download
Trial Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. |
Data Sheet
Name | File extension | File size | Revision | Last update |
---|---|---|---|---|
2730 Digitizer family data sheet | 4.56 MB | 3 | June 27th, 2024 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. |
Manuals
Name | File extension | File size | Revision | Last update |
---|---|---|---|---|
UM5960 CoMPASS User Manual | 13.33 MB | 24 | October 1st, 2024 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. | ||||
WaveDump2 User Manual | 4.07 MB | 6 | July 25th, 2024 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. | ||||
2730 Digitizers User Manual | 4.46 MB | 5 | November 4th, 2024 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. | ||||
Safety Information and Product Support Service (ENG/ITA) | 1.85 MB | - | March 13th, 2024 | |
Changelog: Note: |
Application SW
Name | File extension | File size | Revision | Last update | OS | OS Version |
---|---|---|---|---|---|---|
WaveDump2 for Digitizer 2.0 | ZIP | 46.59 MB | 2.0.0 | July 29th, 2024 | Windows | - |
Changelog: [View] - Aligned to CAEN Dig2 1.6.1 and CAEN FELib 1.3.1 and CAEN Dig1 1.1.0 Readme: [View] -----------------------------------------------------------------------------
Download
GNU Lesser General Public License 3.0 Release Notes: Release_Notes.txt Build: July 29th, 2024 PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! GNU LESSER GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/> This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU General Public License, supplemented by the additional permissions listed below. 0. Additional Definitions. As used herein, “this License” refers to version 3 of the GNU Lesser General Public License, and the “GNU GPL” refers to version 3 of the GNU General Public License. “The Library” refers to a covered work governed by this License, other than an Application or a Combined Work as defined below. An “Application” is any work that makes use of an interface provided by the Library, but which is not otherwise based on the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the Library. A “Combined Work” is a work produced by combining or linking an Application with the Library. The particular version of the Library with which the Combined Work was made is also called the “Linked Version”. The “Minimal Corresponding Source” for a Combined Work means the Corresponding Source for the Combined Work, excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application, and not on the Linked Version. The “Corresponding Application Code” for a Combined Work means the object code and/or source code for the Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but excluding the System Libraries of the Combined Work. 1. Exception to Section 3 of the GNU GPL. You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL. 2. Conveying Modified Versions. If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a copy of the modified version: a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does not supply the function or data, the facility still operates, and performs whatever part of its purpose remains meaningful, or b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy. 3. Object Code Incorporating Material from Library Header Files. The object code form of an Application may incorporate material from a header file that is part of the Library. You may convey such object code under terms of your choice, provided that, if the incorporated material is not limited to numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do both of the following: a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its use are covered by this License. b) Accompany the object code with a copy of the GNU GPL and this license document. 4. Combined Works. You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such modifications, if you also do each of the following: a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library and its use are covered by this License. b) Accompany the Combined Work with a copy of the GNU GPL and this license document. c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this license document. d) Do one of the following: 0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the Application with a modified version of the Linked Version to produce a modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source. 1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a) uses at run time a copy of the Library already present on the user’s computer system, and (b) will operate properly with a modified version of the Library that is interface-compatible with the Linked Version. e) Provide Installation Information, but only if you would otherwise be required to provide such information under section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a modified version of the Combined Work produced by recombining or relinking the Application with a modified version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.) 5. Combined Libraries. You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities that are not Applications and are not covered by this License, and convey such a combined library under terms of your choice, if you do both of the following: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities, conveyed under the terms of this License. b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 6. Revised Versions of the GNU Lesser General Public License. The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered version of the GNU Lesser General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation. If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall apply, that proxy’s public statement of acceptance of any version is permanent authorization for you to choose that version for the Library. | ||||||
WaveDump2 for Digitizers 2.0 | GZ | 68.18 MB | 2.0.0 | July 29th, 2024 | Linux | - |
Changelog: [View] - Aligned to CAEN Dig2 1.6.1 and CAEN FELib 1.3.1 and CAEN Dig1 1.1.0 Readme: [View] -----------------------------------------------------------------------------
Download
GNU Lesser General Public License 3.0 Release Notes: Release_Notes.txt Build: July 29th, 2024 PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! GNU LESSER GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/> This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU General Public License, supplemented by the additional permissions listed below. 0. Additional Definitions. As used herein, “this License” refers to version 3 of the GNU Lesser General Public License, and the “GNU GPL” refers to version 3 of the GNU General Public License. “The Library” refers to a covered work governed by this License, other than an Application or a Combined Work as defined below. An “Application” is any work that makes use of an interface provided by the Library, but which is not otherwise based on the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the Library. A “Combined Work” is a work produced by combining or linking an Application with the Library. The particular version of the Library with which the Combined Work was made is also called the “Linked Version”. The “Minimal Corresponding Source” for a Combined Work means the Corresponding Source for the Combined Work, excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application, and not on the Linked Version. The “Corresponding Application Code” for a Combined Work means the object code and/or source code for the Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but excluding the System Libraries of the Combined Work. 1. Exception to Section 3 of the GNU GPL. You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL. 2. Conveying Modified Versions. If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a copy of the modified version: a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does not supply the function or data, the facility still operates, and performs whatever part of its purpose remains meaningful, or b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy. 3. Object Code Incorporating Material from Library Header Files. The object code form of an Application may incorporate material from a header file that is part of the Library. You may convey such object code under terms of your choice, provided that, if the incorporated material is not limited to numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do both of the following: a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its use are covered by this License. b) Accompany the object code with a copy of the GNU GPL and this license document. 4. Combined Works. You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such modifications, if you also do each of the following: a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library and its use are covered by this License. b) Accompany the Combined Work with a copy of the GNU GPL and this license document. c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this license document. d) Do one of the following: 0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the Application with a modified version of the Linked Version to produce a modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source. 1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a) uses at run time a copy of the Library already present on the user’s computer system, and (b) will operate properly with a modified version of the Library that is interface-compatible with the Linked Version. e) Provide Installation Information, but only if you would otherwise be required to provide such information under section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a modified version of the Combined Work produced by recombining or relinking the Application with a modified version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.) 5. Combined Libraries. You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities that are not Applications and are not covered by this License, and convey such a combined library under terms of your choice, if you do both of the following: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities, conveyed under the terms of this License. b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 6. Revised Versions of the GNU Lesser General Public License. The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered version of the GNU Lesser General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation. If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall apply, that proxy’s public statement of acceptance of any version is permanent authorization for you to choose that version for the Library. |
Driver
Name | File extension | File size | Revision | Last update | OS | OS Version |
---|---|---|---|---|---|---|
27XX Digitizer USB Driver | TGZ | 1.39 kB | 1.2 | May 26th, 2022 | Linux | - |
Changelog: [View] Fixes the rate limitation of the USB3 link in some Linux systems. Readme: [View] ----------------------------------------------------------------------
Download
Free Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software and Firmware License – Free VersionEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a free of charge, personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use of the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use of the CAEN Software that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation to all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in para. no. 6, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledge that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software.
The End User is solely responsible for compliance with agreements it has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
The End User acknowledges that, under this EULA, CAEN is not obliged to provide the End User with:
If the End User would need any of such activities, It shall enter into a specific and separate agreement with CAEN having as object the required activities.
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non-compliance, as liquidated by the competent court of law.
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. |
Guides
Name | File extension | File size | Revision | Last update |
---|---|---|---|---|
GD6300 CoMPASS QuickStart Guide | 12.94 MB | 24 | October 1st, 2024 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. | ||||
CAEN FELib Library User Guide | 1.46 MB | 2 | June 12th, 2024 | |
Readme:
Download
Build: PUBLIC BETA VERSION Disclaimer TAKE AN ACTIVE PART AND HELP US TO IMPROVE OUR PRODUCTS! EULA – Software LicenseEnd User License Agreement for the CAEN Software and Firmware (the “EULA”)
The download, installation, use or copy of this software and/or firmware (hereinafter also the “CAEN Software”), or any work based on the CAEN Software, implies the acceptance of the terms and conditions set out in this EULA, that shall immediately enter into force. The CAEN Software has been copyrighted by CAEN S.p.A. with registered office in Via Vetraia, 11 – 55049 – Viareggio (LU) – ITALY (hereinafter also “CAEN”). CAEN hereby authorizes the end user (hereinafter also the “End User”) to use the CAEN Software within the context of the following licensing conditions, whereas this EULA represents a binding agreement between the End User and CAEN. The term “CAEN Software” is used to identify the program received by the End User from CAEN and/or CAEN’s independent distributors, downloaded from CAEN’s official website or anyhow provided to the End User by CAEN. Such term does not include any other program that is covered by a separate license and distributed as a different entity. The unauthorized reproduction and/or the unauthorized sale of the CAEN Software or of parts thereof by the End User, is liable to prosecution under the applicable criminal or civil law and will result in severe penalties and claims for damages.
Subject to the End User’s compliance with this EULA, CAEN hereby grants the End User with a personal, limited, non-exclusive, non-transferable, non-sublicensable, revocable, worldwide (except as limited below) license to download, install, access, and use the CAEN Software.
The CAEN Software and any accompanying documentation, local computer files installed or utilized by the installer application are in the property of CAEN and are protected by Italian and international laws. This EULA defines the legal use of the CAEN Software, together with all updates, revisions, substitutions, and any copies of the CAEN Software made by or for the End User. The End User further acknowledges and agrees that CAEN owns and shall continue to own all rights, titles, and interests in and to the CAEN Software, including associated intellectual property rights under copyright, trade secrets, patents, or trademark laws. This EULA does not grant the End User any ownership interest in or to the CAEN Software, but only a limited and strictly personal right of use that is revocable in accordance with the terms of this EULA. All rights not expressly granted to the End User are reserved to CAEN or to their respective owners. The structure, organization, and code of the CAEN Software are CAEN’s valuable trade secrets and constitutes CAEN’s confidential information, that cannot be disclosed by the End User without CAEN’s prior written consent.
With regards to the CAEN Software and/or to any of its parts, the End User undertakes not to:
The End User may reproduce the CAEN Software only if such reproduction is strictly necessary for the use of the CAEN Software. Necessary reproductions include the installation of the CAEN Software from the original system disk or from the downloaded installation archive on the mass memory of the hardware, as well as the loading of the CAEN Software into the main memory during CAEN Software operation. Moreover, the End User may reproduce the CAEN Software for backup purposes. However, only one backup copy of the original system disk or the downloaded installation archive may be created and/or stored. Said copy must be marked as a backup. Should a rotational backup of a system’s entire data set, including the CAEN Software programmers, be essential for a fast reactivation of the system following a complete breakdown, the End User may create backup copies in the required quantities. The pertinent system disks shall be marked accordingly. These backup copies may be used for archive purposes in connection with data backup only. The End User will not modify the user guides, operating manuals and release notes made available by CAEN, if any. Such documentation may:
The End User shall take the necessary steps to prohibit unauthorized access to the CAEN Software and its documentation by third parties. The original data media, as well as all backup copies, shall be stored in a secure place, safe from access by unauthorized third parties.
To the maximum extent permitted by applicable laws and regulations, the CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind. CAEN, its licensors, and its and their affiliates disclaim all warranties, conditions, and representations (express, implied, oral, and written) with respect to the CAEN Software including without limitation all express, implied, and statutory warranties and conditions of any kind, such as title, non-interference with your enjoyment, authority, non-infringement, merchantability, fitness or suitability for any purpose (whether or not CAEN knows or has reason to know of any such purpose), system integration, accuracy or completeness, results, reasonable care, workmanlike effort, lack of negligence, and lack of viruses, whether alleged to arise under law, by reason of custom or usage in the trade, or by course of dealing. CAEN does not warrant that the CAEN Software will operate uninterrupted or be error free or that defects are correctable or will be corrected. Any service obtained using the CAEN Software is done at the End User’s own discretion and risk, and the End User will be solely responsible for any damage to his/her computer system or loss of data that results from the download and/or use of any such material or service. Without limiting the generality of the foregoing, CAEN, its licensors, and its and their affiliates make no warranty that:
The terms set forth herein will apply to the maximum extent permitted by applicable laws.
To the extent not prohibited by the applicable laws, in no event shall CAEN be liable for personal injury or any incidental, special, indirect, or consequential damages whatsoever, including, without limitation, damages for loss of profits, loss of data, business interruption, or any other commercial damages or losses, arising out of or related to the End User’s use of or inability to use the CAEN Software, however caused, regardless of the theory of liability (contract, tort, or otherwise) and even if CAEN has been advised of the possibility of such damages. As mentioned in article 6 above, CAEN Software is provided on an “as is” and “as available” basis, “with all faults” and without warranty of any kind, therefore the End User acknowledges that the use of the CAEN Software shall be at its own risk and the End User waves any right to compensation for any kind of damage or loss directly or indirectly consequential to the use of the CAEN Software. In no event shall CAEN’s total liability to the End User for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the total amount of the fees paid for the CAEN Software license. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, the foregoing limitations of liability shall apply only to the full extent permitted by the applicable law.
The End User is solely responsible for compliance with agreements the End User has executed with third parties. The End User agrees to indemnify and hold CAEN harmless from any claim or demand, including reasonable legal fees, made by any third party in connection with or arising out of the End User’s use of the CAEN Software, the End User’s violation of any terms or conditions of the CAEN Software license and/or violation of applicable laws, or the violation of any rights of another person or entity.
CAEN undertakes to provide all the services and technical maintenance services, together with all the relevant additional services, if any, as indicated in the applicable CAEN and/or CAEN terms and conditions (“Terms & Conditions”).
If applicable due to the software provided to the End User, the End User acknowledges and agrees that CAEN may remotely extract and collect, at any time and without any obligation to notice the End User, technical and performance data concerning the CAEN Software’s usage by the End User and its performance, and all the necessary related information. Such technical and performance data will be collected, stored and used by CAEN and/or CAEN’s technical partners only for the purpose of monitoring and improving the performance of the CAEN Software, to prevent and/or fix technical failures and/or bugs as well as to facilitate the performance of any technical support activity. In addition to the above, CAEN and/or its technical partners might collect personal data of the End User for the sole purposes of the management of the license and the performance of technical additional services. The personal data collected by CAEN and/or its technical partners might consist in the following:
CAEN and/or its technical partners shall process the personal data collected in accordance with the applicable data protection laws, as specified in CAEN’s and/or its technical partners’ privacy notices provided to the End User during the registration process and/or immediately after such process.
During the term of this EULA, the End User will maintain electronic and other records sufficient for CAEN to confirm that the End User has complied with the terms and conditions of this EULA. CAEN may audit, and/or have third party to audit, the End User’s records and computer systems (including servers, databases, and all other applicable software and hardware) to ensure that the End User has fully complied with this EULA. The End User shall cooperate with CAEN’s audit team and promptly and accurately respond to database queries, location information, system reports, and other reports requested by CAEN. If the End User is not in compliance with the CAEN Software licenses, the End User shall fully compensate CAEN for all the loss and damages caused directly and/or indirectly by the relevant non- compliance, as liquidated by the competent court of law..
This EULA involves software, products and/or technical data that may be controlled under laws and regulations that might forbid and/or regulate the export of such software, products and/or technical data (“Export Laws“). The End User shall comply with all Export Laws to assure that the CAEN Software is not exported, directly or indirectly, in contravention of the applicable Export Laws.
The license granted to the End User is perpetual with reference to the version of the CAEN Software originally provided to the End User. Notwithstanding with the above, the Parties acknowledge that:
After a termination, the End User shall immediately:
CAEN has the right to demand a sworn statement from the End User regarding the fulfillment of its obligations under the present paragraph.
CAEN has the right, at any time, when necessary, to unilaterally amend and modify the EULA without the obligation to priorly inform the End User of such changes.
This CAEN Software License and the relationship between the End User and the Licensor is governed by the laws of Italy and shall be interpreted accordingly. Any dispute arising out of or in connection with this EULA shall be referred to and finally resolved by the Court of Florence, Italy. The United Nations Convention on the International Sale of Goods does not apply to the CAEN Software License.
This EULA constitutes the entire understanding between the parties regarding the use of the CAEN Software. In the event of any conflict between the EULA and the Terms & Conditions of the CAEN Software, the Terms & Conditions will prevail. |
Related Software Products
Name | Description |
---|---|
WaveDump2 | Readout Application for Digitizer 2.0 |
CoMPASS | Multiparametric DAQ Software for Physics Applications |
Sci-Compiler | Graphical Programming Language for CAEN Open FPGA Boards |
CAEN FELib Library | High level library for CAEN Digitizers 2.0 |
Related Firmware Products
Name | Description |
---|---|
DPP-PHA | Digital Pulse Processing for the Pulse Height Analysis |
DPP-PSD | Digital Pulse Processing for Charge Integration and Pulse Shape Discrimination |
DPP-ZLEplus | Digital Pulse Processing for the Zero Length Encoding |
DPP-SUP | Super Licence for CAEN Digitizers |
Compare
Compare with Digitizers.
Loading...
Accessories
- A319A
- Clock & Sync cable assembly for Digitizer Series 2.0 - 20 cm
- A319B
- Clock cable assembly from Digitizer Series 1.0 to Digitizer Series 2.0 - 20cm
- A316
- Cable assembly 2.54mm 2-pin header female - 5 cm
- A952
- Cable assembly 2.54mm 34 pin female to 2.54mm 34 pin female - 50 cm
- A953
- Cable assembly 2.54mm 34 pin female to two 2.54mm 34 pin female – 50 cm
- A954
- Cable assembly 2.54mm 34 pin female to two 2.54mm 16 pin female - 50 cm
Ordering Options
Code | Description | |||
---|---|---|---|---|
WVX2730XAAAA | VX2730 - 32 Ch. 14 bit 500MS/s Digitizer with Programmable Input Gain RoHS |
Related Products
Related Software
WaveDump2
Readout Application for Digitizer 2.0
Sci-Compiler
Graphical Programming Language for CAEN Open FPGA Boards
CoMPASS
Multiparametric DAQ Software for Physics Applications
CAEN FELib Library
High level library for CAEN Digitizers 2.0
Related Firmware
DPP-ZLEplus
Digital Pulse Processing for the Zero Length Encoding
DPP-SUP
Super Licence for CAEN Digitizers
DPP-PSD
Digital Pulse Processing for Charge Integration and Pulse Shape Discrimination
DPP-PHA
Digital Pulse Processing for the Pulse Height Analysis