N8315

NIM Linear Power Supply 150W

The CAEN Mod. N8315 is a 150W NIM Linear Power Supply, suitable to power any NIM crate; the module is two NIM units wide.

Safety features includes:

The Unit is powered by 115 or 230 Vac, 50 ÷ 60 Hz. On the front panel the status of the Power Supply is indicated by green/red LED.

Code	Description
WN8315WAAAAA	N8315 – NIM Linear Power supply 150W (±6V 5A,±12V 3A, ±24V 1.5A)	RoHS
WPERS0831501	N8315 Customization – 110VAC Input Adapting	RoHS


Mechanics	Double width NIM mechanics
Mains input	230 VAC or 115 VAC, 50-60 Hz
Maximum Total Output Power	150 W
Power requirements	280W at full load
Fuse External	External 2 A, class T (230 VAC)
Output power	5 A @ ±6V ; 3 A @ ±12 V ; 1.5 A @ ±24 V
Load Regulation	< 0.5 % for 10-100% load change, < 0.02 % for ±10% line change ±6V: <30 mV for 10-100% load change, <1mV for ±10% line change ±12 V: <60 mV for 10-100% load change, <2mV for ±10% line change ±24V: <120 mV for 10-100% load change, <5mV for ±10% line change
Isolation	CE acc. to EN 61010
Ripple	±6V < 5 mVpp ±12 V < 8 mVpp ±24 V < 10 mVpp
Transient response recovey	0.15 ms for recovery to ±1% of voltage for 10-100% load change
Output Impedance	0.6 mΩ static
Output Voltage Characteristics	Dual tracking for all ±DC outputs; Soft start; DC output calibration (manually)
Output Current Characteristics	OVC protection / Trip Off
Over Voltage Protection	Trip Off when the output voltage > 130% of nominal voltage
Under Voltage Protection	Trip Off when the output voltage < 70% of nominal voltage
Over Current Protection	Trip Off when current: > 6A@+24V, > 2A@-24V, > 6A@+12V, > 3.75A@ 12V, > 10A@±6V
Over Temperature Protection	Trip Off when temperature > 75° C
Temperature sensors	nr.1
Status control	Status control Fail/Status LED signal: RED: Fail, GREEN: System is on and power supplies are functioning properly
Switches	Power 1 (On) / 0 (Off)
Operation	0÷45°C without derating