Background image

EASY6000 Custom Developments

EASY - Radiation & Magnetic Field Tolerant

Photo of EASY6000 Custom Developments

Overview

EASY6000 Custom Developments are power supply systems designed by CAEN for specific detector upgrades of the High-Luminosity LHC experiments. Built on the EASY (Embedded Assembly SYstem) architecture, they are radiation and magnetic-field tolerant, up to 200 Gy and 0.5 T depending on the model, and are installed directly in the experimental area, close to the detectors. They are remotely controlled from a safe area through CAEN branch controllers and the standard SYx527 control software. All systems are fed with a high-voltage DC line, from 270 to 400 VDC depending on the system, which minimizes voltage drop and cable size over long distances. Their modular crates are designed for easy maintenance.

For the CMS Outer Tracker, the A6601 concentrates a complete power supply unit on a single card. It provides one MainLV channel, split into 12 individually controlled outputs for remote DC-DC converters, one AUX channel for the cooling service and three HV channels up to -800 V for detector bias. Up to ten cards fit in a crate, and each one can be extracted without disconnecting the output cables.

The A6603, developed for the CMS Inner Tracker, combines a serial-powering current source up to 15 A / 350 W with LV, AUX and HV outputs up to -800 V. Two boards form a Power Supply Module, and a 19″/6U crate hosts up to five of them, with output connectors compatible with the existing detector cabling.

The EASY BRIC (B- and Radiation-tolerant Intermediate Converter) completes the range on the low-voltage side, powering DC-DC converter stages in hostile areas. Its water-cooled crates host up to four modules with eight 10–12 V / 16 A channels each. Channels are monitored and controlled through the A1660 Branch Controller, which manages up to two crates, for a total of 64 channels.

Highlights

  • Custom power supply systems for HL-LHC detector upgrades, including the CMS Inner and Outer Tracker
  • Radiation and magnetic-field tolerant, up to 200 Gy and 0.5 T depending on the model, for installation directly in the experimental area
  • Integrated outputs on a single board: LV, AUX, HV up to -800 V and serial powering up to 15 A / 350 W, depending on the system
  • Low-voltage intermediate conversion with EASY BRIC: up to 64 channels of 10–12 V / 16 A for powering DC-DC stages
  • 270 to 400 VDC input distribution, which reduces voltage drop and cable size over long distances
  • Modular crate architectures designed for easy maintenance, with cards extractable without disconnecting output cables
  • Remote control from the safe area through CAEN branch controllers, fully integrated with SYx527 systems and the CAEN control software suite