R7780

Form Factor: 1U width, 265mm depth compatible with 19” rack
Weight: 2400 g

10 ns

Pulse width + 10 ns

Two channels for the preamplifier power supply:

• +5 V @ 1 A
• +12 V @ 1 A

SBC: ARM Cortex‐A9 quad core @ 1 GHz running Linux®
FPGA: Cyclone V GX

• UNATTENDED: After the start‐up sequence, all data are logged on‐board without external intervention
• ATTENDED: The device works under full control of an external PC (INCC software compliance) transmitting raw data for further analysis; time‐stamped lists are saved to binary files compatible with PTR‐32 format
• LIST: Like the attended mode, but raw data are saved on the SD cards to PTR‐32 files under the user external control

• Local storage on non-volatile memory of log files and analysis results (Coincidence and Multiplicity data) in unattended mode, while log files and raw data (time-stamped pulses) in list mode.
• Two removable 32GB SD cards replicate same folder structure and contains same data for redundancy reasons to prevent from non-volatile memory device failures
• LED indicators inform on the SD card state.
• Attaching a USB stick to the OTG USB port activates the fully automatic copy of all data from non-volatile memory; a LED indicator shows the state of the process.

• Gate width from 10 ns to 1.3 ms in steps of 10 ns
• Pre-delay: from 0 to 100 μs in steps of 10 ns
• Long delay (the delay between the Reals+Accidentals gate and the Accidentals gate) from 0 to 5 ms in steps of 1 μs
• Measurement time between 0.1 s and 43600 s (12 h)
• Reals+Accidentals and Accidentals on 64-bit counters
• Number of multiplicity bins for Accidentals and Reals+Accidentas up to 512 (32 bits per each bin)

• Internal clock = 100 MHz
• Timestamp resolution = 10 ns
• Pulse pair resolution = pulse width + 10 ns
• Maximum rate in coincidence/multiplicity mode = 7 Mcps (measured at constant rate)
• Maximum rate in counting mode = 16.6 Mcps (measured at constant rate)

• Windows® and Linux® support
• CAEN Shift Register control software
• Compatibility with INCC software
• Web Interface (Board information retrieval and configuration, files management, data readout, firmware upgrade)

• Operating temperature: -10°C to +55°C
• Storage temperature: -10°C to +85°C
• Operating humidity: up to 93%
• Storage humidity: up to 93%
• Operating Humidity: up to 93% RH non condensing
• Storage Humidity: up to 93% RH non condensing
• Altitude: < 2000m
• Pollution Degree: 2
• Overvoltage Category: II
• EMC Environment: Commercial and Light Industrial
• IP Degree: IPX= Enclosure, not for wet location

EMC: CE 2014/30/EU Electromagnetic compatibility Directive
Safety: CE 2014/35/EU Low Voltage Directive

Integrated primary power supply unit 9-36V DC:

• 1 A @ 28 V

• 1.17 A @ 24 V

• 2.4 A @ 12 V

• 3.22 A @ 9 V

Measured in full load conditions (12V and 5V preamplifier outputs on 1A, HVPS output on 2kV @500 μA, SBC on, fan on, USB stick in, 2 SD cards in, Ethernet link active)