-
12 independently controllable High Voltage channels
-
Output Voltage: 1500 V
-
Output current: 10 mA
-
Available with Negative / Positive Polarity
-
SHV connectors
-
Floating Type: Common Ground
-
Low ripple
-
Under/over-voltage alert, overcurrent and max. voltage protection
-
Interlock logic for unit enable
-
Software Tool for easy channel management
The CAEN Mod AG538D is a single width board (5 TE wide) that houses 12 independent high voltage channels.
The channels share a Common Ground, with all output returns hardwired to the chassis/crate ground. The board is available with positive or negative output polarity Channels are delivered with SHV connectors. Consult our connectors reference page for technical information.
The output voltage range is 0 ÷ 1500 V, with 50 mV monitor resolution. The maximum output current is 10 mA, with 10 mA monitor resolution.
Independently programmable for each channel:
|
Output voltage: |
0 ÷ 1500 V |
Step: 50 V |
|
Current limit (Iset): |
0 ÷ 10 mA |
Step: 200 nA |
|
V Ramp up/down: |
1 ÷ 500 V/s |
Step: 1 V/sec |
|
TRIP parameter |
0 ÷ 999.9 s; 1000 s = Infinite |
Step: 0.1 s |
Safety features includes:
-
Channels: can be enabled or disabled through the Global Interlock logic.
-
Overvoltage and Undervoltage warning: when the output voltage differs from the programmed value.
-
Overcurrent detection: When a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
-
Hardware VMAX Maximum output voltage can be set, via front panel potentiometer, at the same common value for all the board channels. VMAX value can be read out via software.
CAEN provides a complete software range to control, monitor and configure its Power Supply products.
-
GECO2020 GEneral COntrol Software
-
CAEN HV Wrapper Library,
-
HiVoCS web tool
-
OPC Server for CAEN Power Supplies
-
EPICS Service
These tools, which support the most used operating systems, spread from low level libraries (CAEN HV Wrapper Library), to be used as a source for customer designed software, to the WEB interface (HIVOCS) available on each mainframe, up to the all-inclusive Control Software (GECO2020) with user friendly graphical interfaces, to meet any application need.
Advanced control via OPC Server (CAEN OPC Server) and EPICS (EPICS IOC) is supported, to easily include CAEN power supplies within existing setups featuring such standards. All CAEN Control Software are available for free download.
Accessories
You also may be interested in…
SY4527
SY4527LC
SY5527
SY5527LC
Request a Quote
Compare
|
Image
|
Name
|
No. of Channels
|
Max Output <br>V
|
Max Output <br>I
|
Vset/Vmon Resolution
|
Iset/Imon Resolution
|
Max. Ramp Up/Down Rate
|
Ripple Typ.
|
Connectors
|
Max Power per Channel
|
Grounding
|
Polarity
|
|
|
A1538D |
12 |
1500 V |
10 mA |
50 mV |
200 nA |
500 V/s |
< 20 mVpp |
SHV |
12 W |
Common Floating Return |
Neg / Pos |
|
|
A1515B |
14 / 16 |
1000 V / 1400 V |
1 / 0.1 mA or 3 / 0.3 mA selectable |
20 mV |
Iset: 20 nA Imon: 1 / 0.1 nA |
100 V/s |
< 10 mVpp (CM) <br>< 5 mVpp (DM) |
Radiall 52 / REDEL 51 |
0.7 W |
Full Floating |
- |
|
|
A7038 |
32 / 48 |
1000 V |
0.1 mA |
20 / 2 mV |
2 nA / 500 pA |
500 V/s |
< 10 mVpp |
SHV / DB37 |
0.1 W |
Common Floating Return |
Neg / Pos |
|
|
AG538D |
12 |
1500 V |
10 mA |
50 mV |
200 nA |
500 V/s |
< 20 mVpp |
SHV |
12 W |
Common Ground |
Neg / Pos |
Technical Specifications
|
No. of Channels |
12 (Common Ground) |
|
Output Voltage |
0÷1.5 kV |
|
Polarity |
Negative or Positive |
|
Max. Output Current |
10 mA |
|
Voltage Set Resolution |
50 mV |
|
Voltage Monitor Resolution |
50 mV |
|
Current Set Resolution |
200 nA |
|
Current Monitor Resolution |
200 nA |
|
VMAX hardware |
0÷1.5 kV common for all the board channels |
|
VMAX hardware accuracy |
± 2% of FSR |
|
VMAX software |
0÷1.5 kV settable for each channel |
|
VMAX software resolution |
1 V |
|
Ramp Up/Down |
1÷500 Volt/sec, 1 Volt/sec step |
|
Voltage Ripple |
|
|
Voltage Monitor vs. Output Voltage Accuracy |
typical: ± 0.3% ± 0.2 V max: ± 0.3% ± 1 V |
|
Voltage Set vs. Voltage Monitor Accuracy |
typical: ± 0.3% ± 0.2 V max: ± 0.3% ± 1 V |
|
Current Monitor vs. Output Current Accuracy |
typical: ± 2% ± 3 µA max: ± 2% ± 15 µA |
|
Current Set vs. Current Monitor Accuracy |
typical: ± 3% ± 3 µA max: ± 3% ± 15 µA |
|
Maximum output power |
12 W per channel (software safety limit) |
Footer
