A319A

four 2.54mm 34 pin male header to Samtec ERF8-040-01-L-D-RA-L-TR male connector

2.54mm standard pitch, to 1.27mm ERNI connector (34 pin / 32 channels)

CLK-OUT / CLK-IN daisy chain front panel between non homogenous digitizer series, / 20 cm

Adapt one (Robinson Nugent 68-pin type) flat connector into four 16-pin Header connectors / 25 cm, For ECL inputs of CAEN TDC boards or ECL ports of V1495, V2495, DT5495

BNC male to MCX male / 1 m

1,0 m

converts from USB to RS-485

Splits the 32 used pins of a single header-type connector into 2 16pin header-type connectors

16 LEMO 00 female or MCX male to 2.54 mm 34-pin female / 1 m, 50 cm

2.54mm 34 pin female to 2.54mm 34 pin female / 50 cm

1,0 m

Adapts to 64 channels 2.54 mm header, Compliant to both single-ended and differential 2740/2745 models

16 LEMO 00 female or MCX male to 2.54 mm 34-pin female / 1 m, 50 cm

Adapts to 64 channels MCX, Compliant to single-ended 274xB models only

FISCHER S101A004 male to 3-pin AMPMODU IV female for clock signal / 10 cm

Adapt one (Robinson Nugent 68-pin type) flat connector into two 34-pin Header connectors / 25 cm, For ECL inputs of CAEN TDC boards or ECL ports of V1495, V2495, DT5495

16 independent input channels on a 34 pin male header connector, Matches the QDC’s input impedance from 50 Ohm to 110 Ohm

LEMO 00 male to MCX male / 1 m

Power cords used to supply the CAEN Preamplifier and Discriminator models A1421 / 20cm, 1m

"CLK-OUT / CLK-IN daisy chain front panel / 18 cm

CLK-OUT / CLK-IN daisy chain front panel between non homogenous digitizer series / 20 cm

Cable assembly for the front panel LVDS I/Os interconnection / 5 cm

Detectors can be moved up to one meter (A5260B) away from the readout electronics without experiencing a significant signal degradation. / 50cm, 1m

Each A5261 cable allowing to both read out and bias a single remotized SiPM

"SYNC-OUT / SYNC-IN daisy chain back panel / 50 cm"

Controllers