-
1-unit wide VME 6U module
-
Four DB9 connectors with ±6 V, ±12 V, ±24 V each
-
Low Ripple
-
Monitoring of all 6 voltages on each output
-
Protection of all voltages by self-recovering electronical fuses
-
Individually filtered outputs to ensure low noise operation
-
Standard voltage output compatible with electronics by CAEN and many other manufacturers
The CAEN Mod. V5425 is a 4-channel VME power distribution module; it converts the power supplies provided by a VME crate into ±6 V, ±12 V and ±24 V outputs, suitable for preamplifiers and other devices.
Output voltages are delivered through 4 Sub D9 female connectors. The total output power is 36W (24W for ±6 V and ±24 outputs).
|
D-Sub9 connector 9 pin female connector for Mod.V5425 |
Consult our connectors reference page for technical information.
Electronic fuses, automatically recovering after short circuit, protect the individual voltage outputs. All voltages are monitored and their status is displayed by LEDs.
Low-noise preamplifiers require DC power that is free of interference generated by other modules inserted in the VME crate. The mod. V5425 ensures this low-noise capability by filtering the power lines separately at each connector.
You also may be interested in…
VME8001
VME8008B
µ-crate
NV8020A
VME8100
VME8011
VME8200
A1422
VME8004B
VME8004X
VME8008X
Request a Quote
Compare
|
Image
|
Name
|
Package
|
No. of Channels
|
Pre-Amp Supply
|
Digitizer Supply
|
Connectors
|
Noise
|
|
|
V5425 |
VME |
Pre-Amp: 4 |
+6 V / 2 A<br>-6 V / 1.5 A<br>±12 V / 500 mA<br>±24 V / 250 mA |
N.A. |
Pre-Amp: 4 Sub D9 female |
±6 V < 1 mVpp<br>±12 V ±24 V < 2 mVpp |
|
|
DT5423 |
Desktop |
Pre-Amp: 4<br>Digitizer: 1 |
+12 V / 400 mA<br>-12 V / 200 mA |
+12 V / 2.1 A |
Pre-Amp: 4 Sub D9 female <br>Digitizer: Mini DIN 6 pos Shielded |
±12 V < 5 mVpp (Pre-Amp)<br>+12 V < 10 mVpp (Digitizer) |
|
|
N5424 |
NIM |
Pre-Amp: 4 |
±6 V / 1 A<br/>±12 V / 1 A<br/>±24 V / 100 mA |
N.A. |
Pre-Amp: 4 Sub D9 female |
±6 V < 2 mVpp<br>±12 V ±24 V < 3 mVpp |
Technical Specifications
|
Mechanical Packaging |
1-unit wide VME 6U module; weight: 280g |
|
Power Requirements |
Output: ±24V @ 0.25A, ±12V @ 0.5A, -6V @ 1.5A, +6V @400mA (36W out total). Consumption: ±12V: 600 mA, +5V: 6.1A Output: No Load. Consumption: ±12V: 0A; +5V: 200mA |
|
Output Connectors |
Power Supply output; 4 Sub D9 female connectors |
|
Displays |
±6V, ±12V, ±24V: green LEDs; power supply OK when ON. Fault: red LED, error status when ON |
|
Push button |
Rearm: restore operation after an error status (Fault LED) is detected; Fault cause must be removed before sending Rearm |
|
Maximum Output Power |
Total: 36W; ±6V: 24W; ±24V: 24W |
|
Current Output |
Voltage, Max Current at full load, Nominal current +6V, 2.14 A, 2 A -6V, 1.62 A, 1.5 A +12V, 560 mA, 500 mA -12V, 530 mA, 500 mA +24V, 272 mA, 250 mA -24V, 275 mA, 250 mA |
|
Voltage drop at full load |
Voltage, Drop (%)
|
|
Voltage Ripple |
(typical values, 16Hz ÷ 20MHz bandwidth) |
|
Vout / Temperature coefficient 10°C ÷ 60°C range |
|
|
Environmental |
Indoor use |
|
Operating Temperature |
-20 °C ÷ 50 °C |
|
Operating Humidity |
25% ÷ 95% RH non condensing |
|
Storage Temperature |
-30 °C ÷ +80 °C |
|
Storage Humidity |
5% ÷ 90% RH non condensing |
|
Altitude |
≤2000 m |
|
Pollution Degree |
2 |
|
Overvoltage Category |
|| |
|
EMC Environment |
Commercial and light industrial |
|
IP Degree |
IPX0 enclosure, not for wet location |
|
Compliance |
|
Footer
