EASY Subsystem Power Supply Module
Magnetic field and radiation tolerant
12 4 kV / 1 mA channels
Channel floating up to 5 V between each other
VMax and IMax set by trimmer
Channel protections: overvoltage, overcurrent, overtemperature
On/Off for each channel
Interlock capability
48 V Service local and remote on/off
Please note: the A3540 has been superseded by the A5540A.
The CAEN Mod. A3540 is a 12 Channel 4 kV / 1 mA Power Supply Board, developed for operation in magnetic field and radioactive environment. Each A3540 houses 12 floating channels, floating up to 5 V between each other, each rated 4 kV / 1 mA. The board is available in a negative (A3540N) and a positive (A3540P) version.
The output voltage can be set with 500 mV monitor resolution. For each channel, a voltage protection limit, SVMAX, can be fixed via software with 500 mV resolution, and the output voltage cannot be programmed beyond this value.
The outputs are available on an SHV connector, a 12-channel Radiall R317580 HV coaxial connector. For further technical details, please refer to our connectors reference page.
Its safety features allow the module to perform as a current generator. All channels can be enabled or disabled through the Global Interlock logic. If the output voltage differs from the programmed value by more than 3% of the voltage full scale range, the channel is signalled to be in either Overvoltage or Undervoltage condition.
When a channel attempts to exceed the programmed current limit, Overcurrent detection signals it as being in “overcurrent” and puts it into TRIP status. The output voltage is then varied to keep the current below the programmed limit for a programmable TRIP time, after which the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
Finally, the Hardware VMAX and IMAX values, which set the maximum output voltage and the maximum current, can be fixed via a front panel potentiometer at the same common value for all the board channels, and can be read out via software.
|
Image
|
Name
|
No. of Channels
|
Connectors
|
No. max of boards per crate
|
Width (slots)
|
Max power per channel (W)
|
Iset/Imon resolution
|
Vset/Vmon resolution
|
Current Full Scale
|
Voltage Full Scale (V)
|
Max Ripple (mVpp)
|
|
|
A3501 |
12 |
SHV |
10 |
2 |
0.1 |
100 nA |
100mV |
1 mA |
100 |
30 |
|
|
A3535 |
32 |
SHV |
5 |
4 |
1.75 |
100 nA |
500 mV |
500 µA |
3200 |
30 |
|
|
A3512 |
6 |
CPE HV |
7 |
3 |
12 |
100 nA |
1 V |
1 mA |
12000 |
50 |
|
|
A3540 |
12 |
SHV |
10 |
2 |
4 |
100 nA |
500 mV |
1 mA |
4000 |
30 |
|
No. of Channels |
12 |
|
Polarity |
Positive (A3540P) or Negative (A3540N), with individual floating return (up to 5 V between each other) |
|
Output Voltage |
0 ÷ 4 kV (connector output) |
|
Max. Output Current |
1 mA |
|
Voltage Set/Monitor Resolution |
500 mV |
|
Current Set/Monitor Resolution |
100 nA |
|
VMAX hardware |
0 ÷ 4 kV |
|
VMAX hardware accuracy |
± 2% of FSR |
|
VMAX software |
0 ÷ 4 kV |
|
VMAX software resolution |
500 mV |
|
Voltage Ripple |
< 30 mV pp From 10 Hz to 20 MHz at full load |
|
Voltage Monitor vs. Output Voltage Accuracy |
|
|
Voltage Set vs. Output Voltage Accuracy |
|
|
Current Monitor vs. Output Current Accuracy |
|
|
Current Set vs. Output Current Accuracy |
|
|
Weight |
2.7 kg |