EASY Subsystem Power Supply Module
Magnetic field and radiation tolerant
12 100 V / 1 mA channels
Available with positive and negative floating channels
The CAEN Mod. A3501 is a 12 Channel 100 V / 1 mA Power Supply Board, developed for operation in magnetic field and radioactive environment. Each A3501 houses 12 individual floating channels, each rated 100 V / 1 mA, and the board is available in a negative version (A3501N) and a positive version (A3501P).
The output voltage can be set with 100 mV monitor resolution, while the output current is monitored with 100 nA resolution. For each channel, a voltage protection limit, SVMAX, can be fixed via software with 100 mV resolution, and the output voltage cannot be programmed beyond this value.
The outputs are available on a 12-channel LEMO type coaxial connector. For further technical details, please refer to our connectors reference page.
Its safety features allow the module to perform as a current generator. All channels can be enabled or disabled through the Global Interlock logic. If the output voltage differs from the programmed value by more than 3% of the voltage full scale range, the channel is signalled to be in either Overvoltage or Undervoltage condition.
If a channel tries to draw a current larger than its programmed limit, it is signalled to be in Overcurrent condition and enters TRIP status: the SY1527 system detects this state as a fault and reacts according to the setting of the TRIP parameter. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, after which the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
Finally, the Hardware VMAX and IMAX values, which set the maximum output voltage and the maximum current, can be fixed via a front panel potentiometer at the same common value for all the board channels, and can be read out via software.
|
Image
|
Name
|
No. of Channels
|
Connectors
|
No. max of boards per crate
|
Width (slots)
|
Max power per channel (W)
|
Iset/Imon resolution
|
Vset/Vmon resolution
|
Current Full Scale
|
Voltage Full Scale (V)
|
Max Ripple (mVpp)
|
|
|
A3501 |
12 |
SHV |
10 |
2 |
0.1 |
100 nA |
100mV |
1 mA |
100 |
30 |
|
|
A3535 |
32 |
SHV |
5 |
4 |
1.75 |
100 nA |
500 mV |
500 µA |
3200 |
30 |
|
|
A3512 |
6 |
CPE HV |
7 |
3 |
12 |
100 nA |
1 V |
1 mA |
12000 |
50 |
|
|
A3540 |
12 |
SHV |
10 |
2 |
4 |
100 nA |
500 mV |
1 mA |
4000 |
30 |
|
No. of Channels |
12 |
|
Polarity |
Individual Floating |
|
Output Voltage |
0 ÷ 100 V (connector output) |
|
Max. Output Current |
1 mA |
|
Voltage Set/Monitor Resolution |
100 mV |
|
Current Set/Monitor Resolution |
100 nA |
|
VMAX hardware |
0 ÷ 100 V |
|
VMAX hardware accuracy |
± 2% of FSR |
|
VMAX software |
0 ÷ 100 V |
|
VMAX software resolution |
100 mV |
|
Voltage Ripple |
< 30 mV pp (From 10 Hz to 20 MHz at full load) |
|
Voltage Monitor vs. Output Voltage Accuracy |
|
|
Voltage Set vs. Output Voltage Accuracy |
|
|
Current Monitor vs. Output Current Accuracy |
|
|
Current Set vs. Output Current Accuracy |
|