Splits one 34-pin LVDS I/O header into two 34-pin connectors
32 signal pins routed, 16 per output connector
Same 2.54 mm header type on input and outputs, no adapters needed
50 cm length
RoHS compliant
The A953 is a 50 cm splitter cable that divides the LVDS I/O connector of a CAEN board into two independent outputs.
It takes the 32 signal pins of a single 34-pin, 2.54 mm pitch female header and routes them to two connectors of the same type, 16 signals each. Each output connector is therefore only partially populated, carrying its own half of the I/O lines.
This makes it easy to send different groups of LVDS signals to two separate destinations, such as two modules or two parts of the acquisition chain, without custom wiring.
Compatibility
Designed for CAEN boards equipped with the LVDS I/O connector:
VME Digitizer Series 1 (V1720, V1724, V1725/V1725S, V1730/V1730S, V1751, V1761)
V1782 Octal Digital MCA
V1741 64-channel Peak Sensing ADC
|
Function |
1-to-2 signal splitter |
|
Input connector |
1 × 34-pin female header, 2.54 mm pitch |
|
Output connectors |
2 × 34-pin female header, 2.54 mm pitch |
|
Signals routed |
32 pins total (16 per output) |
|
Cable length |
50 cm |