EASY3000 Power Supply Module
Magnetic field and radiation tolerant
3 floating (up to 100 V with respect to ground) 2 ÷ 7 V / 5 A channels
35 W maximum output power per channel
VMax and IMax set by trimmer for each channel
On/Off for each channel
Channels individually controlled and protected
Sensing Lines for voltage drop compensation
Interlock capability (per channel)
48 V Service local and remote on/off
The CAEN Mod. A3602 is a 3 Channel 7 V / 5 A Power Supply Board, developed for operation in magnetic field and moderate radioactive environment. The board houses three floating channels with reversible polarity, floating up to 100 V with respect to ground, each rated 7 V / 5 A with a maximum output power of 35 W. The output voltage range at the connector is 2 ÷ 7 V, with 5 mV monitor resolution.
The channels are provided with Remote Sensing Lines that compensate for the voltage drop over the connection cables.
The A3602 uses a DB37 connector, type FCI DCPV37S300GT. For further technical details, please refer to our connectors reference page.
Its safety features allow the module to perform as a current generator. All channels can be enabled or disabled through the Global Interlock logic. If the output voltage differs from the programmed value by more than 3% of the voltage full scale range, the channel is signalled to be in either Overvoltage or Undervoltage condition.
When a channel attempts to exceed the programmed current limit, Overcurrent detection signals it as being in “overcurrent” and puts it into TRIP status. The output voltage is then varied to keep the current below the programmed limit for a programmable TRIP time, after which the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
Finally, the Hardware VMAX and IMAX values, which set the maximum output voltage and the maximum current, can be fixed via software with 5 mV resolution, and the output voltage cannot be programmed beyond this value.
|
Image
|
Name
|
No. of Channels
|
Connectors
|
No. max of boards per crate
|
Width (slots)
|
Max power per channels
|
Iset/Imon resolution
|
Vset/Vmon resolution (mV)
|
Current Full Scale (A)
|
Voltage full Scale (V)
|
Max Ripple (mVpp)
|
|
|
New A5001 |
32 |
RJ45 |
10 |
2 |
1.3 W |
10 μA |
1 |
0.260 |
0 ÷ 5 |
20 |
|
|
New A5009 |
12 |
APP30 |
5 |
4 |
45 W |
10 mA |
5 |
9.3 |
1.5 ÷ 9.3 |
20 |
|
|
A3602 |
3 |
DB37 |
10 |
2 |
35 W |
10 mA |
5 |
5 |
2 ÷ 7 |
5 |
|
|
A3025B |
4 |
Brass hexagon head bolt |
5 |
4 |
150 W |
100 mA |
5 |
25 |
2 ÷ 8 |
10 |
|
|
A3016 |
6 |
APP 1317G4 |
5 |
4 |
90 W |
10 mA |
5 |
16 |
2 ÷ 8 |
20 |
|
|
A3050B |
2 |
Brass hexagon head bolt |
5 |
4 |
300 W |
100 mA |
5 |
50 |
2 ÷ 8 |
10 |
|
|
A3100 |
1 |
APP PC5933T |
5 |
4 |
600 W |
100 mA |
5 |
100 |
2 ÷ 8 |
10 |
|
|
A3050 |
2 |
APP PC5933T |
5 |
4 |
300 W |
100 mA |
5 |
50 |
2 ÷ 8 |
10 |
|
|
A3025 |
4 |
APP PC5933T |
5 |
4 |
150 W |
100 mA |
5 |
25 |
2 ÷ 8 |
10 |
|
|
New A3100HBP |
1 |
Brass hexagon head bolt |
5 |
4 |
600 W |
100 mA |
10 |
50 |
8 ÷ 14 |
10 |
|
|
A3006 |
6 |
APP 1317G4 |
5 |
4 |
90 W |
10 mA |
10 |
6 |
4 ÷ 16 |
20 |
|
|
A3016B |
6 |
Brass hexagon head bolt |
5 |
4 |
90 W |
10 mA |
5 |
16 |
2 ÷ 8 |
20 |
|
|
A3100B |
1 |
Brass hexagon head bolt |
5 |
4 |
600 W |
100 mA |
5 |
100 |
2 ÷ 8 |
10 |
|
Polarity |
Floating (up to 100 V with respect to ground) |
|
Output Voltage |
2 ÷ 7 V (connector output) |
|
Max. Output Current |
5 A |
|
Voltage Set/Monitor Resolution |
5 mV |
|
Current Set/Monitor Resolution |
10 mA |
|
VMAX hardware |
2 ÷ 7 V |
|
VMAX software |
2 ÷ 7 V |
|
VMAX software resolution |
5 mV |
|
Voltage Ripple |
< 5 mVpp |
|
Voltage Monitor vs. Output Voltage Accuracy |
|
|
Voltage Set vs. Output Voltage Accuracy |
|
|
Current Monitor vs. Output Current Accuracy |
|
|
Current Set vs. Output Current Accuracy |
|
|
Load Regulation |
± 0.3 % (with sense wires) |
|
Output Power (per Channel) |
35 W |