4 independent channels in 1U NIM module (2 & 1 channel versions also available)
500 V / 200 µA output range
Channels with individually selectable positive or negative polarity
SHV output connectors
Common floating return
Low Ripple
Under/over-voltage alert, overcurrent and max. voltage protection
Interlock logic for board enable and Individual channel kill
5 nA Current monitor resolution (with x10 Imon-Zoom: 500 pA)
Graphic color display
Local and Remote control (USB2.0 / RS485 / RS232)
Daisy-chain capability
Optional DC Input Power Equalizer
Software Tools for easy channel management
The CAEN Mod. N1419 provides 4 independent high voltage channels in a single-width NIM module. Two-channel and one-channel versions (N1419A and N1419B) are also available. Each channel delivers up to ±500 V and 200 µA, and its output polarity can be selected independently.
All models are housed in a single-width NIM module and feature SHV output connectors: the Mod. N1419 provides 4 channels, the N1419A provides 2 channels, and the N1419B provides 1 channel. For further technical information, consult our connectors reference page.
The channels share a common floating return, insulated from the crate ground. Ramp-up and ramp-down rates can be set independently for each channel from 1 to 50 V/s in 1 V/s steps. The module offers 5 nA Iset/Imon resolution, and the Imon Zoom increases the current monitor resolution to 500 pA.
The module can be controlled locally, with the aid of a graphic color display, or remotely via USB, RS232 or RS485, the latter allowing a daisy-chain network of N14xx modules to be built. It can also be controlled via TCP/IP through the Smart Fan Unit of the CAEN NIM8301 crate. A complete set of free software tools is available to control the unit: GECO2020, with a user-friendly GUI, and the CAEN HV Wrapper library for custom software development. EPICS and LabVIEW are also supported.
N14xx modules feature a USB VCP interface and can be programmed from a PC by connecting the PC’s USB port to the module’s USB type-B port. The on-board controller (FT232BM or FT232RL chip) requires a driver, available on this page or at ftdichip.com.
The module also includes dedicated safety features that allow it to operate as a current generator. A common safety board interlock logic enables or disables the channels globally, while individual input signals provide a kill function for each channel. An overvoltage and undervoltage warning is issued when the output voltage differs from the programmed value by more than 2% of the set value (minimum 1 V). If a channel attempts to draw a current higher than its programmed limit, it enters TRIP status and holds the maximum allowed value for a programmable time (TRIP) before being switched off. A programmable hardware VMAX protection limit is also available.
Several special versions are available. Besides the 2-channel N1419A and the 1-channel N1419B, the NDT1419 is a 2U NIM module with a 220/110 V AC plug for desktop operation, equipped with a 2.8″ touchscreen, Ethernet and USB interface, while the N1419ET is a 2U NIM module with the same 2.8″ touchscreen, Ethernet and USB interface.
The A1480 DC Input Power Equalizer is available as an option.
|
Image
|
Name
|
No. of Channels
|
Max Output V
|
Max Output I
|
Vset/Vmon Resolution
|
Iset/Imon Resolution
|
Max. Ramp Up/Down Rate
|
Ripple Typ (>1kHz)
|
Connectors
|
Max Power per Channel
|
Features
|
|
|
N1471ET |
4 |
±5500 V |
300 μA |
0.1 V |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
500 V/s |
< 3 mVpp |
SHV |
1.65 W |
Common Floating Return |
|
|
N1419 |
4 /2 / 1 |
±500 V |
200 μA |
0.01 V |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
100 V/s |
< 3 mVpp |
SHV |
0.1 W |
Common Floating Return |
|
|
N1471 |
4 /2 / 1 |
±5500 V |
300 μA |
0.1 V |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
500 V/s |
< 3 mVpp |
SHV |
1.65 W |
Common Floating Return |
|
|
N1470 |
4 /2 / 1 |
±8000 V |
3 mA |
0.2 V |
Iset: 50 nA <br>Imon: 50 / 5 nA |
500 V/s |
< 5-10 mVpp |
SHV |
9 W (< 3 kV) <br>8 W (> 3 kV) |
Common Floating Return<br>N1470AL: local control only<br>N1470AR: remote control only |
|
|
N1471HET |
4 |
±5500 V |
20 μA |
0.1 V |
Iset: 1 nA <br>Imon: 1 / 0.05 nA |
500 V/s |
< 2 mVpp |
SHV |
110 mW |
Common Floating Return |
|
|
NDT1471 |
4 |
±5500 V |
300 μA |
0.1 V |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
500 V/s |
< 3 mVpp |
SHV |
1.65 W |
Common Floating Return <br>NIM/Desktop |
|
|
N1570 |
2 |
±15000 V |
1 mA |
0.5 V |
Iset: 20 nA <br>Imon: 20 / 2 nA |
500 V/s |
< 4-20 mVpp |
HV LEMO |
10 W |
Common Floating Return |
|
|
NDT1419 |
4 |
±500 V |
200 μA |
0.01 V |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
100 V/s |
< 3 mVpp |
SHV |
0.1 W |
Common Floating Return <br>NIM/Desktop |
|
|
NDT1471H |
4 |
±5500 V |
20 μA |
0.1 V |
Iset: 1 nA <br>Imon: 1 / 0.05 nA |
500 V/s |
< 2 mVpp |
SHV |
110 mW |
Common Floating Return <br>NIM/Desktop |
|
|
N1471H |
4 /2 / 1 |
±5500 V |
20 μA |
0.1 V |
Iset: 1 nA <br>Imon: 1 / 0.05 nA |
500 V/s |
< 2 mVpp |
SHV |
110 mW |
Common Floating Return |
|
|
N1470ET |
4 |
±8000 V |
3 mA |
0.2 V |
Iset: 50 nA <br>Imon: 50 / 5 nA |
500 V/s |
< 5-10 mVpp |
SHV |
9 W (< 3 kV) <br>8 W (> 3 kV) |
Common Floating Return |
|
|
NDT1470 |
4 |
±8000 V |
3 mA |
0.2 V |
Iset: 50 nA <br>Imon: 50 / 5 nA |
500 V/s |
< 5-10 mVpp |
SHV |
9 W (< 3 kV) <br>8 W (> 3 kV) |
Common Floating Return NIM/Desktop |
|
|
N1419ET |
4 |
±500 V |
200 μA |
0.01 V |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
100 V/s |
< 3 mVpp |
SHV |
0.1 W |
Common Floating Return |
|
|
N1410 |
4 |
±1000 V |
200 μA |
20 mV |
Iset: 5 nA <br>Imon: 5 / 0.5 nA |
100 V/s |
< 3 mVpp |
SHV |
200 mW |
Common Floating Return |
|
Packaging |
Single width NIM unit |
|
Output channels |
4 / 2 / 1 channels, Common Floating Return, SHV connector Positive or Negative Polarity (requires internal setting) |
|
Output ranges |
500 V / 200 µA (IMRANGE = High) |
|
Max. Ch. Output Power |
100 mW |
|
Vset Resolution |
10 mV |
|
Vmon Resolution |
10 mV |
|
Iset Resolution |
5 nA |
|
Imon Resolution |
5 nA
500 pA (IMRANGE = High)
(IMRANGE = Low) – Imon Zoom Active |
|
Vmax |
0 ÷ 510 V Absolute maximum HV level that the channel is allowed to reach, independently from the preset value Vset. |
|
Vmax resolution |
± 0.1 V |
|
Ramp Up/Down |
1÷50 Volt/s, 1 Volt/s step |
|
Trip |
|
|
Voltage Ripple |
|
|
Vmon vs. Vout Accuracy |
±0.02% of read value ±500 mV |
|
Vset vs. Vout Accuracy |
±0.02% of read value ±500 mV |
|
Imon vs. Iout Accuracy |
±2% of read value ±20 nA (IMRANGE = High) |
|
Iset vs. Iout Accuracy |
±2% of read value ±30 nA (IMRANGE = High) |
|
Humidity range |
0 ÷ 80% |
|
Operating temperature |
0 ÷ 45°C |
|
Storage temperature |
-10 ÷ 70°C |
|
Vout / Temperature coefficient |
max. 50 ppm / °C |
|
Imon / Temperature coefficient |
max 100 ppm / C°; max 300 ppm / C° with Imon zoom |
|
Long term stability Vout vs. Vset |
± 0.02% (after one week @ constant temperature) |