32 channels per adapter
1.27 mm 68-pin ERNI SMC female to 2 × 2.54 mm 34-pin male header (2-tier)
Screw mounting on the host board ERNI connector
Passive, no power required
RoHS compliant
The A371 is a passive 32-channel adapter that converts the 1.27 mm 68-pin ERNI SMC input connector of CAEN boards into two standard 2.54 mm pitch 34-pin male headers (2-tier plug).
It lets you feed analog signals into high-density ERNI inputs using standard 2.54 mm 34-pin connections. Combined with two A385 adapters, it provides a complete path from 32 LEMO 00 (or MCX) coaxial cables to the board inputs.
Typical applications
V1741 Peak Sensing ADC inputs. Two A371 adapters screw directly into the ERNI ports of the V1741, covering all 64 channels. Each A371 can then be connected to two A385 adapters, for example to read signals from a shaping amplifier.
740 and 740D Digitizer inputs. Compatible with the inputs of the 740 and 740D Digitizer series.
Channel mapping
The upper row of the A371 corresponds to channels 0–15; the last pin is not used.
The lower row corresponds to channels 16–31; the last pin is not used.
Channel 0 is at the top left of the adapter.
|
Image
|
Name
|
Description
|
Related Modules
|
Features
|
|
|
A3429 |
64 channel Adapter to 2.54mm Male Header Connector |
A1429 |
four 2.54mm 34 pin male header to Samtec ERF8-040-01-L-D-RA-L-TR male connector |
|
|
A371 |
Double 2.54mm 34 pin to 68-pin ERNI adapter |
V1741 Peak Sensing ADC, 740, 740D Digitizer Series |
2.54mm standard pitch, to 1.27mm ERNI connector (34 pin / 32 channels) |
|
|
A319A |
Clock & Sync cable assembly |
CAEN Digitizer Series 2.0 |
CLK-OUT / CLK-IN daisy chain front panel / 20 cm |
|
|
A319B |
Clock cable assembly Digitizer 1.0/2.0 |
CAEN Digitizer Series 1.0, CAEN Digitizer Series 2.0 |
CLK-OUT / CLK-IN daisy chain front panel between non homogenous digitizer series, / 20 cm |
|
|
A966 |
1.27mm 68 pin to four 2.54mm 16 pin cable adapter |
V862, CAEN TDC boards, V1495, V2495, DT5495 |
Adapt one (Robinson Nugent 68-pin type) flat connector into four 16-pin Header connectors / 25 cm, For ECL inputs of CAEN TDC boards or ECL ports of V1495, V2495, DT5495 |
|
|
A659 |
BNC to MCX cable adapter |
CAEN Digitizer Series 1.0 |
BNC male to MCX male / 1 m |
|
|
A643 |
SMA to BNC cable adapter |
A1423B, A1426, A1425 |
1,0 m |
|
|
N1568ADAT |
USB RS485 adapter Board |
N1568A |
converts from USB to RS-485 |
|
|
A954 |
2.54mm 34 pin to two 16 pin cable adapter |
V812, V814, V895, VME Digitizers Series 1.0, V1782 MCA, V1741 Peak Sensing ADC |
Splits the 32 used pins of a single header-type connector into 2 16pin header-type connectors |
|
|
A385 |
16 LEMO 00 or MCX to 2.54 mm 34-pin adapter |
V785, N674, V1741, A371, N568E |
16 LEMO 00 female or MCX male to 2.54 mm 34-pin female / 1 m, 50 cm |
|
|
A952 |
2.54mm 34 pin to 34 pin cable adapter |
A1442, A1429, N1068, N6741, VME Digitizers Series 1.0 / 2.0, V1782 MCA, V1741 Peak Sensing ADC, V972 |
2.54mm 34 pin female to 2.54mm 34 pin female / 50 cm |
|
|
A642 |
SMA to MCX cable adapter |
A1423B, A1426, A1425 |
1,0 m |
|
|
A372F |
2.54mm header to the 2mm header adapter |
2740/2745 Digitizer Family |
Adapts to 64 channels 2.54 mm header, Compliant to both single-ended and differential 2740/2745 models |
|
|
A392 |
16 LEMO 00 or MCX to 2.54 mm 34-pin adapter |
V792 |
16 LEMO 00 female or MCX male to 2.54 mm 34-pin female / 1 m, 50 cm |
|
|
A372M |
MCX Coax to 2mm header adapter |
2740/2745 Digitizer Family (single-ended input models) |
Adapts to 64 channels MCX, Compliant to single-ended 274xB models only |
|
|
A318 |
FISCHER S101A004 to AMPMODU IV adapter |
CAEN Digitizer Series 1.0, 741 Peak Sensing ADC |
FISCHER S101A004 male to 3-pin AMPMODU IV female for clock signal / 10 cm |
|
|
A967 |
68-pin P50 to two 2.54 mm 34-pin cable adapter |
V862, V767A, V767, V1190A/B, VX1190A/B, V1495, V2495, DT5495 |
Adapts one 3M P50E-068S (Robinson Nugent 68-pin type) flat connector into two 17+17-pin male flat-cable connectors with locks (3M 4634-7301) / 25 cm |
|
|
A992 |
16-ch Impedance adapter |
V792 |
16 independent input channels on a 34 pin male header connector, Matches the QDC’s input impedance from 50 Ohm to 110 Ohm |
|
|
A654 |
LEMO to MCX cable adapter |
CAEN Digitizer Series 1.0 |
LEMO 00 male to MCX male / 1 m |
|
Type |
Passive connector adapter |
|
Channels |
31 |
|
Board side |
1 × 68-pin ERNI SMC female, 1.27 mm pitch |
|
Cable side |
2 × 34-pin (17×2) male header, 2.54 mm pitch, 2-tier |
|
Channel mapping |
Upper row: ch 0–15 · Lower row: ch 16–31 (last pin of each row not used) |
|
Compatible modules |
V1741 (2 × A371 per board), 740 and 740D Digitizer series |
|
Compliance |
RoHS |